WINIX Filter T

WINIX Filter T is a complete filter set for the Air Purifiers ZERO PRO, ZERO+, H950 and HR1000. This filter set includes an Active Carbon filter and a H13 HEPA filter (99,999%). To ensure the best performance and the Highest Efficiency of the air purifier, we recommend you to replace your compete filter set once every year.

The integrated Filter Change Indicator on the user panel will notify you with a red light, when it is time to change your complete filter set.

For a full filter replacement, we recommend you the following steps:

1. Remove the front panel by grasping its upper edge and gently pulling forward.
2. Remove from the protective plastic wrap from the new filters before using it.
3. Install your new filter set T in this order:

1. 1. Install the H13 HEPA filter inside the air purifier.
   2. Install the Active Carbon filter against the H13 HEPA Filter.
   3. Place the Pre-filter back where it belongs.
   4. Replace the front panel by first inserting the latch at the bottom edge into the base of the unit.
   5. For more information you can also download the user manual from our website.

After replacing the filters, you must use a thin object, such as a paper clip, and press this inside the middle of the reset button for 5 seconds. This action will reset the Filter Change Indicator and your air purifier will start measuring the use of the air purifier and the filter again.

To keep an optimal and efficient cleaning performance, we recommend you to clean the pre-filter every 14 days with a vacuum cleaner or soft brush.