WINIX Filter F

Air Purifier Filter F is a complete filter cassette for the Air Cleaner U450. This filter set includes a washable pre-filter, an Active Carbon filter and a HEPA filter (99,97%). To ensure the best performance and the Highest Efficiency of your air purifier, we recommend you to replace your filter set once every year.

The integrated Filter Change Indicator on the user panel will notify you with a red light, when it is time replace the entire filter set.

For a full filter replacement, we recommend you the following steps:

1. Remove the front panel by pulling gently from the lower portion of the panel.
2. Remove the Filter Cassette by gently pulling out from the bottom and down from the top.
3. Remove from the protective plastic wrap from the new filters before using it.
4. Install the new filter cassette by inserting tabs up into the air cleaner and gently pushing in at the bottom tab until the frame fits into place snuggly.
5. Replace the front panel by hooking the panel on the top of the unit.
6. Plug in air cleaner and press ‘power’ button until short “beep” sounds.
7. For more information you can also download the user manual from our website.

After replacing the filters, you must use a thin object, such as a paper clip, and press this inside the middle of the reset button for 5 seconds. This action will reset the Filter Change Indicator and your air purifier will start measuring the use of the air purifier and the filter again.

To keep an optimal and efficient cleaning performance, we recommend you to clean the washable pre-filter every 14 days with a vacuum cleaner or soft brush.